OPERATION CONTROL LEVERS AND PEDALS The control levers and pedals are used to travel with the machine and operate the work equipment. It is important to become familiar with there functions as they relate to the movement of the machine and it’s work equipment. Failure to do so may lead to damage to the machine or surrounding property as well as injury to the operator or other personnel. LEVER LAYOUT VIEW 1. Safety lock lever 3. Left work equipment control lever (With auto-deceleration system) 2. Travel levers (With auto-deceleration system) 4.
Right work equipment control lever (With auto-deceleration system) SAFETY LOCK LEVER When leaving the operator's compartment, set the safety lock lever securely to the LOCK position. If the safety lock lever is not at the LOCK position and the control levers are touched by mistake, it may lead to serious personal injury. If the safety lock lever is not placed securely at the LOCK position, the control lever may move and cause a serious accident or injury. Check to be sure the condition of the lock lever is as shown in the diagram. When pulling the safety lock lever up, be careful not to touch the work equipment control lever.
When pushing the safety lock lever down, be careful not to touch the work equipment control lever. PC400LC-7E0 2-37