Komatsu — SHIFTING GEAR

. OPERATION OPERATION SHIFTING GEAR The machine does not have to be stopped to shift gears. 1. Move steering, forward-reverse, gear shift lever (1) to the desired gear position to shift gears. REMARK 3 - 101 GEAR SHIFTING When the joystick is at th e FORWARD or REVERSE position osition and switch (a) or switch (b will change. ) is pushed, the transmission speed UP switch (a): Each time th e switch is pressed, the transmission will shift up one speed. time the switch is pressed, the n one speed. DOWN switch (b):

Each transmission will shift dow When the lever is moved t o the forward (to set to FORWARD) f rom the N position, the tra nsmission shifts to F1 If the UP switch is presse d once when the transmission is in F 1, the transmission shifts t o F2. o F3. ifts to F2. ifts to F1. mission shifts to R1. to R2. to R3. ifts to R2.

ifts to R1, If the UP switch is presse d once when the transmission is in F 2, the transmission shifts t If the DOWN switch is pre ssed once when the transmission is in F3, the transmission sh If the DOWN switch is pre ssed once when the transmission is in F2, the transmission sh When the lever is moved t o the rear (to set to REVERSE) from the N position, the trans If the UP switch is presse d once when the transmission is in R 1, the transmission shifts If the UP switch is presse d once when the transmission is in R 2, the transmission shifts If the DOWN switch is pre ssed once when the transmission is in R3, the transmission sh If the DOWN switch is pre ssed once when the transmission is in R2, the transmission sh For details of the maximum s peed in each speed range, see "SPECIFICATIONS (PAGE 5- The speed range in use is dis played on the panel display according to the gearshift operation.

For example: Neutral: N is displayed on th FORWARD 2nd: F2 is displa yed on the display panel A (2 REVERSE 3rd: R3 is display ed on the display panel A (2) When the parking brake leve