Komatsu — SHIFTING GEAR

. OPERATION OPERATION The selected shift mode is displayed on display panel B (multi-information) of the monitor panel. In [F1 - R1] shift mode (initial setting is completed) Lamps (c) and (d) are OFF. In [F1 - R2] shift mode (initial setting is completed) Lamp (c) is ON and lamp (d) is OFF. In [F2 - R2] shift mode (initial setting is completed) Lamp (d) is ON and lamp (c) is OFF. 3 - 102 GEARSHIFTING USING SHIFT MODE SELECTION nge is displayed in the N position before starting. DOWN carried Shift mode selection means that the selected speed ra When the joystick is in the N position, if UP switch (a) or switch (b) is pressed, the shift mode selection can be out.

Shift operation when [F1-R2] shift mode is set When the joystick is at the N position and the UP switc mode and lamp (c) lights up. Following this, if the joysti range is set to F1. If the lever is operated to the rear switched R1 → R2. h is pressed once, the transmission is set to the [F1-R2] ck is operated forward (to set to FORWARD), the speed (to set to REVERSE), the speed range is automatically Shift operation when [F2-R2] shift mode is set When the joystick is at the N position and the UP switc mode and lamp (d) lights up. Following this, if the joysti range is set to F1 → F2. If the lever is operated to the re switched R1 → R2.

h is pressed twice, the transmission is set to the [F2-R2] ck is operated forward (to set to FORWARD), the speed ar (to set to REVERSE), the speed range is automatically REMARK Even when the transmission is set to [F1-R1] mode, [F1- R2] mode, or [F2-R2] mode, if the UP switch or DOWN switch is operated, this will be given priority and manual o peration can be carried out. For example: After the [F1-R2] mode has been set, if the joystick is ope rated forward (to set to FORWARD), the speed range is set to F1. However, if the lever is kept operated forward and UP switch (a) is pressed once, the speed range will shift to F2; if the UP switch is pressed twice, th e speed range will shift to F3.

When the transmission is in F3 and DOWN switch (b) is pressed once, the speed ra nge will shift to F2; if the DOWN switch is pressed twice, the speed range will shift to F1. On the other hand, if the joystick is operated to the rear (to set to REVERSE), the speed range is automatically switched R1 → R2. However, if the lever is kept operate d to the rear and UP switch (a) is pressed once, pressed once, the speed range will shift to R1. the speed range will shift to R3; if the DOWN switch (b) is However, the setting stays in the [F1-R2] mode.

If the ste ering, directional, and gearshift lever is returned to N and then operated forward (to set to FORWARD), the speed ra nge is set to F1; if the lever is operated to the rear (to set to REVERSE), the speed range is automatically switche d R1 → R2.