Komatsu — METHOD OF LIFTING MACHINE

. OPERATION TRANSPORTATION PRECAUTIONS FOR LOADING and METHOD OF LIFTING MACHINE WARNING parking lever to the attachments and options are not the standard For weight, see "SPECIFICATIONS (PAGE 5-2)". 3 - 135 After placin g the machine on the specified position of the trailer, secure i t according to th e following procedur 1. Lower t he work equipment slowly. 2. Secure control levers with the work eq 3. Set the parking brake lever to the LOC 4. Turn th e starting switch to the OFF pos ition stopping the engine, the n remove the key 5. Lock th e cab door, left and right engine side covers, and the battery i nspection cover. 6.

Place b locks under both ends of the t racks to prevent the machine the machine with chains or wire rope of suitable strength. iculary careful to secure the ma chine in position so it does no t slip to the side. Never per form lifting operations with any per son on the machine. Always m ake sure that the wire rope (cable) u sed for lifting the machine is of a mple strength for t he weight of the machine. Never try to lift the machine in any posture ot her than the posture given in the There is d anger that the machine may lose its When lifti ng the machine,pay careful attentio n to the center of gravity to maintain When lifting the machine, perform the oper follows: 1. Stop th LOCK 2.

Set the on the r e engine and be sure to set th position. 2. Set the lifting position for the machine a ight. NOTICE This method of lifting applies to the standard sp The method of lifting differs according to the of the procedure for machines th installed. For details specification , please consult your Komatsu dist