Komatsu — REVERSE AND REPLACE THE END BITS AND CUTTING EDGES

. MAINTENANCE SERVICE PROCEDURE METHOD OF USING POWER WRENCH 4 - 35 The power wrenc h se t is eq uipped with a s This socke t is designe d to gr ip the nuts and prevent the wrench set from pullin g out. T his mean g can be performed one worker This socke t has a double co nstruction, and is designed so that the outside ca n rotate 30° It is used a s follows. (1) Cutting edges or e nd bit (2) Ratche t handl e or torque (3) Rotatin g sock (4) Reactio n arm 1. Align th e hexagon s of th e inside socket (6) and outsid e socket (5), the insert the nut th at is to be tighte ned or loosened. 2. After in serting se (7).

When t his is d one , the o utside socket w ill catch the notch in the nut sea t surface, and th e wrench will n ot come off. 3. Put th e reaction tighten or loosen. 4. Turn th e outside s ocket (5) countercloc kwise, and remove the wrench 30· clockwi