. MAINTENANCE SERVICE PROCEDURE CLEAN AND CHECK RADIATOR FINS WARNING radiator. 4 - 36 For th e cleanin g and check, sto p the engine without fail and confirm t hat th e fan is not rotating, and carr If the radiato r fins are clogge d or dirty, c lean and i nspect them 1. R emove four bolts (1) at corners of grill (2), the n open the grill. 2. C lean th e radiator fins cl ogged with mud, dust and leaves i nstead o f compressed a ir. REMARK Chec k the hy draulic cooler h oses. If any hose is cr acked or hardene d by a ge, replace with a n ew hose. Also check and t ighten a ll loose hose cl amps.
Run the fan i n reverse to swit ch the direction of the air and clea n the r adiato r fins between the m ain radiator and sub 1) Rem ove bolts (1) at the four corners of the radiator fins, rill (2). he direction selector valve of the fan act the stopper (10 mm (0.4 in)). ), then secure with bolts (1). run the fan in reverse. cleaning, return the screws of the ve to their original positions.
ins, then 2) Turn open radiator g screws (3) of t moto 3) Clos 4) Start r until they cont e radiator grill (2 the engine and act the stopper (10 m ), then secure with bo run the fan in reverse 5) After completing the cleaning, return the direc tion selector val ve to their original pos CLEAN FUEL TANK STRAINE Clea n the str ainer if there is any dirt collected in it. Remove the If the straine filler cap (1) of t r is dirty, clean i he fuel tan t with diese k and take l fuel.