Komatsu — CHECK FOR LOOSE ROPS MOUNT BOLTS

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE parts. CHECK, CLEAN FUEL STRAINER 4 - 67 12. Refill the specifi ed quantity of oil through oil fi ller (F) 13. After adding the oil, check that th e oil is at the specified l evel. For d etails, se e "CHECK OIL L (PAGE 3-78)". POWER TRAIN CAS E, ADD OI If the strainer aged,replac 1. Tight en valve (1 2. Rem ove cap (2 ), and wash the s trainer and s trainer case The s trainer for ms one unit with t 3. After checking and cleaning, set the strainer i n the c ase, then tighte After n cap (2). installing, CHECK FOR LOOSE ROPS MOUNT B OLTS Check fo r loose and damaged bolts.

If any loose bolt is found , tighten to a torque of 1180 t o 1470 Nm (120 to 150 kgm, 868 to 1,085 l bft). t is found, replace the bolt with a genuine Komatsu bolt. f any da maged bol t is found, replace the bolt wit h a genuine