. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER WARNING see dipstick (G). 4 - 73 The oi l is at high te mperature immediately after th e machine h as b een operated.Wait for the o il to cool down before ca rrying out maintenance. The undercover is heavy. Do not go directly under t he cover when o pening or closing it. When r emoving bolts (4), carry o ut the operation at the re ar of the point im mediately unde r the cover so t hat it is possible to escape Refill capacity: 1 .5 liters (0.40 U S gal) 1. Ope n the engin e side cover on the lef t of the machine; you can 2. Remove the un dercover (2) at t he bottom rea r of the chassi s as follows.
1) Remove 2 2) Hold cover of the chass run out.) 3) Lower cove seen at the follows. bolts (3) toward the front of the chassis. 1) Remove 2 bolts (3) toward the front of t he chassis 2) Hold cover (1) and gradual ly remove 2 b olts (4) at the rear of the chass is. (Be careful w hen doing th is. Rain water may un out.) r (2) slowly and open it. Drain plug (P) can be top. 3) Lower cove een at the open it. Dra (P) ca n be