Komatsu — CHECK ALTERNATOR, STARTING MOTOR

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN RECOIL SPRING, ASSIST CYLINDER CASE, ADD OIL in. 2. Loosen the plug and confirm that the internal pressure is released. 4 - 75 Remove bolts (1), t When removing the hen remove cover cover, be careful n Ins ert a scale and chec k that the oil level is 70 to 8 0 mm (2.8 to in) f If th rom e oil the bottom edg is insufficient, CLEAN ENGINE BREATHER ELEMENT 1. 2. 3. 4.

Loosen clamp (1), t hen remove the ho Remove bolt (2), th en remove breathe Rinse the whole br compressed air, th Check the breather the inside, replace the hose with a ne w hose REMARK The engine breather ele ment is at the front end on top of t (behind CHECK ALTERNATOR, STARTING MOTOR The brushes may be wo rn or the bearing m ay hav e run o ut of grease , contact your Komatsu and repairs. frequently, have this inspection carried out every 1000 hours. If th e engine is started frequently, have thi s inspection c arried out e