Kenworth — Kenworth T170 T270 T370 and Hybrid 2011 Body Builders Manual

Section 8 Electrical optional body builder harness Through the use of an optional body harness and additional spare circuits, we have tried to reduce the complexity associ- ated with adding common circuits to a body installation. Note: The most common circuits that body builders may need are pre-connected to this optional wiring harness. The optional body harness can be connected to the chassis harness through a standard connector mounted on the left hand frame rail directly behind the battery box. See Figure 8–20. Truck Body Connector to Chassis Harness Left Rail FIGURE 8-19.

Location of Standard Body Harness Connection For shipping purposes the body harness is coiled and shipped loose in the cab. The body harness wire ends are tagged with circuit markers, identifying the connecting circuit. See Figure 8–21 on the next page. Body Builder Power and Return (Ground) CAUTION: All body builder Power and Return lines must be connected directly to battery terminals and be properly fused. Using the frame as a Return (Ground) is not allowed. Using the frame as a Return could result in the creation of ground loops and damage electronic devices on the truck. 8-24 12/11