Section 8 Electrical INSTALLING A THIRD BATTERY (Not available on hybrid) A third battery is a published option and can be ordered with your vehicle. If this was not done, use Figure 8-25 and 8-26 as guides for installing a third battery. You will need the following additional parts to install the third battery: TABLE 8-9. Third Battery Installation Parts for Parallel Battery Box LH Under Cab Note: (1) For T270/370 with hydraulic brakes use these to install both item 5, otherwise use the existing fasteners. (2) Use this in place of item 2 when liftgate wiring is required. FIGURE 8-24.
Adding a Third Battery 8-30 12/11 Item T170 Qty T270/370 Qty Part Number Description 1 1 1 P27-6100-111 Battery - GRP 31 w/Threaded Posts 2 1 1 K396-1010-008 Jumper Cable, Positive 3 1 1 K395-1020-008 Jumper Cable, Negative 4 0 1 N63-1002 Battery Pad 5 0 2 N20-1025 Battery Retainer, lower 6(1) 0 4 W34-1070-060 Bolt - Hex M8 X 60 7(1) 0 4 K169-162-8CA Nut - Hex Metric 8(1) 0 8 K363-338-2-312 Washer - Flat 9 0 1 N20-1001 Battery Retainer, Upper 10 1 0 15-05609 Battery Hold - Down 11 1 0 15-05719 Battery Hold - Down Hook 12 1 0 27-00791-005 Locknut 13 1 0 27-00428-005 Washer - Flat 5/16 14 0 1 K041-804-275CA Bolt - Hex M10 X 275 15 0 1 K363-3 Washer - Cupped 16 0 1 4023 Button 17(2) 1 1 K396-1710-008 Jumper Cable, Positive 18 1 1 K333-46-18 Ring Terminal, 1/4”