Komatsu — TIRE PRESSURES AND CHECKS

OPERATION TIRE PRESSURES AND CHECKS If the tires show excessive ware, damage or look unusual contact your Komatsu dealer immediately. Do not operate the machine with under inflated, worn or damaged tires. Measure the tire pressure before starting operations and when the tires are cool. If the tire inflation pressure is too low, the tires will be overload; if it is too high, it may cause tire cuts or shock burst. To prevent these problems, adjust the tire inflation pressure according to the table below. Deflection ratio = H - h / H x 100 If the deflection of the tire is excessive, raise the inflation pressure within the limits given in the table to give a suitable deflection.

Inflation Pressure MPa (kgf/cm 2 , PSI) Tire Size (Pattern) Rear Tire 20.5-25-12PR (L2 Traction) 0.27 (2.8, 39.8) 20.5-25-12PR (L3 Rock) 0.27 (2.8, 39.8) WA320PT-5L 2-51 Soft ground (sandy ground) Normal road surface Stockpile Digging Front Tire 0.19 -0.32 (1.9 -3.3, 27.0 - 46.9) 0.19 -0.32 (1.9 -3.3, 27.0 - 46.9) 0.21 - 0.34 (2.1 - 3.5, 29.8 - 49.7) 0.32 (3.3, 46.9) 0.19 - 0.32 (1.9 - 3.3, 27.0 - 46.9) 0.19 - 0.32 (1.9 - 3.3, 27.0 - 46.9) 0.21 - 0.34 (2.1 - 3.5, 29.8 - 49.7) 0.32 (3.3, 46.9)