Komatsu — CHECKS UNDER THE HOOD

Engine Coolant Level OPERATION E. Open top cover (1) at the front of the engine hood and check the coolant level in the recovery tank (2), coolant level should be between the FULL and LOW marks. Add coolant if necessary. F. Check the engine and radiator area for any build up of trash, wood chips, rubbish, leaves or other flammable materials. If flammable materials are found as well as excess build up of oil or dust, remove the flammable material or have the engine cleaned. G. Once finished, be sure the hood panels close properly and will lock securely to prevent tampering by others. HST Fill Cap H. Check to be sure the hydro static transmission fill cap is in place and locked.

If you suspect the fluid level in the transmission is low have it inspected by a qualified maintenance personnel. Hydraulic Fluid Level I. With the work equipment on the ground and all controls neutralized check the hydraulic fluid in the hydraulic tank. The hydraulic tank is located on the right side of the machine behind the front frame under the access ladder. The fluid level should be between the (H) and (L) mark on the indicator located on the front panel of the tank. If you suspect the fluid level is low have it inspected by a qualified maintenance personnel. WA320PT-5L 2-53