Komatsu — IN THE OPERATOR’S CAB

OPERATION Air Suspension Seat Fore-and-aft adjustment Pull lever (1) up, set the seat to the desired position, then release the lever. Fore-and-aft adjustment: 120 mm (4.7 in) Adjusting seat angle Move lever (2) up and push down on the rear of the seat to tilt it backward. Move lever (2) down and push down on the front of the seat to tilt it forward. Adjustment range: 13 degrees (Tilt forward/tilt back angle) Adjusting height of seat Operate lever (2) in the up or down direction to move the seat up or down. These levers are also used for adjusting the seat angle, so adjust the seat angle to set the seat to the desired height. Amount of adjustment:

50 mm (2.0 in) Setting seat for weight Knob (3) controls the air suspension system's air valve. Push or pull the knob to adjust the suspension's strength and compensate for operator weight and/or preference. Adjusting reclining angle Move lever (4) up and move the backrest to the front or rear. Adjustment range: Front 24 degrees Rear 3 degrees Lumbar support Turn grip (5) to adjust the tension applied to the lower back. Adjusting headrest height Move the headrest (6) up or down. Amount of adjustment: 50 mm (2.0 in) Adjusting headrest angle Rotate the headrest (6) to the front or rear. Adjustment range:

60 degrees Adjusting armrest angle Armrest (7) can be operated by hand to spring up approx. 90 degrees (both left and right). In addition, dial (8) under the armrest can be operated by hand to make fine adjustments of the armrest in the up or down direction (left side only). Adjustment range: forward tilt 25 degrees, backward tilt 5degrees Adjusting The Arm Rest Adjust height of wrist rest. Loosen lock lever (2) and adjust the height of wrist rest (1). Amount of adjustment: 60 mm (2.4 in) Keep button (3) pressed and operate lock lever (2) to the FREE position. The lever can be turned in the desired direction. 2-56 WA320PT-5L