Komatsu — START-UP AND CHECKS

START-UP AND CHECKS OPERATION A. Be sure the parking brake (1) is in the locked position and the work equipment lock lever (3) is also in the locked position. B. Make sure the directional lever (2) is set in the neutral position as the engine will not start with the lever in F or R position. C. Set the speed control switch (4) is set in 1st. speed range. D. Now you are ready to start the engine. Follow the procedures outlined below for warm and cold weather starts. Warm Weather Start-ups E. With the ignition key in the “ON” position during warm weather the preheat timer (2) may be illuminated for a moment then go out. As soon as this light goes out the engine is ready to start. F.

Turn the key to the “START” position to crank the engine. Do not depress the accelerator pedal while starting the engine. WA320PT-5L 2-57