Komatsu — START-UP AND CHECKS

OPERATION G. Once the engine starts, release the key and it will return to the “ON” position. H. Allow the engine to idle at a low RPM until warmed up. Cold Weather Start-ups During cold weather the preheat time for the engine will be longer. Below is a chart showing the times of preheating in seconds. I. Once the preheat light (2) goes out depress the accelerator pedal slightly and crank the engine until it starts. If the engine does not start the first time the preheat procedure may need to be repeated. If it continues not to start, contact your Komatsu dealer for repairs. J. Once the engine has started increase the RPM slightly to warm the engine up.

Avoid rapped and high speed acceleration, doing so may damage the engine. K. Check the operation of all gauges and warning systems. Be sure they all work and come up to normal operation. L. Check the operation of all switches. Be sure the lights, wipers, directional, horn and warning flashers and alarms work properly. M. Check the brakes and steering wheel. Be sure they are clean and free from dirt or grease. N. Check the operation of all work controls and pedals.

Remark It is important that a pre-operational check be performed at the beginning of your work shift, even if you are taking the machine operations over from another operator, always perform a pre-operational check before you start work. 2-58 WA320PT-5L Engine Coolant Temperature 0C (0F) Preheat Time In Seconds below -30 (-22) 45 -24 (-13) 38 -20 (-4) 30 -15 (5) 23 -10 (14) 15 -5 (23) 8 0 (32) 1 above 0 (32) 0