OPERATION STARTING YOUR WORK OPERATIONS Do not start the engine if warning tags have been attached to the steering wheel or control levers. Sound your horn to warn others in the area before starting the engine or moving the machine. Operate the machine in a seated position only, with the seat belt fastened snugly around your waist. Do not allow anyone in the cab or on the machine during operations. Check the area to be sure all personnel are clear of the machine and your work area. WARMING THE HYDRAULIC OIL During cold seasons it is advised to warm the hydraulic system up first before operating the machine. Unlock the control safety lock lever by pulling it all the way up.
Depress accelerator pedal lightly and run the engine at a mid-range speed. Operate control lever to TILT position (a) and return it to HOLD position (b) to warm up the hydraulic oil. The relief time at the tilt position (a) should be a maximum of 10 seconds. With this operation, the oil will reach the relief pressure and this will warm up the hydraulic oil more quickly. After carrying out the warming-up operation, check that the gauges and lamps to be sure they are normal. If there is any abnormality, carry out maintenance or repair. Run the engine under a light load until engine cooling water temperature gauge (4) and HST oil temperature gauge (5)are in the white range.
Check for any abnormal exhaust gas color, noise or vibration. If any abnormality is found, contact your Komatsu distributor. WA320PT-5L 2-59