Komatsu — WORK EQUIPMENT CONTROL LEVERS

OPERATION PARALLEL TOOL KIT The 6-segment parallelogram-style linkage is designed to keep the attachment level while lifting a variety of materials. The hydraulic Quick Couplers allows the operator the ability to interchange attachments if needed. WORK EQUIPMENT CONTROL LEVERS Work equipment control levers Use this lever (1) to operate the lift arm and fork. Do not use the FLOAT feature when using the forks kit. Possible injury or damage to machine or load may result 1. Position (a):

RAISE When the work equipment control lever is pulled further beyond the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kick out, and the lever is returned to the HOLD position. 2. Position (b): HOLD The lift arm and fork stop and remain in the same position. 3. Position (c): LOWER 4. Position (d): FLOAT (Do not use this feature) The lift arm moves freely under external force. 5. Position (e): TILT When the work equipment control lever is pulled further from the TILT position, the lever is stopped in this position until the fork reaches the preset position of the positioner, and the lever is returned to the HOLD position. 6.

Position (f): DUMP 2-60 WA320PT-5L