MAINTENANCE SERVICING WHEN REQUIRED CHECK, CLEAN OR REPLACE AIR CLEANER ELEMENT I f inspection, cleaning, or maintenance is carried out with the engine running, dirt will get into the engine and damage it. Always stop the engine before carrying out these operations. When using com- pressed air, there is danger that dirt may be blown around and cause serious injury. Always use safety glasses, dust mask, and other protective equipment. CHECK If air cleaner clogging caution lamp (1) on the machine monitor lights up, clean the air cleaner element.
Do not clean the element until the air cleaner clogging caution lamp lights up.If the element is cleaned frequently before the air cleaner clogging caution lamp lights up, the air cleaner will not be able to reach its performance and the cleaning efficiency will drop. In addition, the frequency of dirt stuck to the element falling inside the inner element will increase. CLEAN 1. Open the engine side cover on the right side of the machine. 2. Remove three clips (2), then remove cover (3). 3. Never remove inner element (5). If it is removed, dust will enter and cause engine trouble. 4. Remove outer element (4). WA320PT-5L 3-15