Komatsu — WASHING METHOD

MAINTENANCE CLEANING AXLE CASE BREATHER When cleaning the axle breather, apply the parking brake and secure the front and rear frames with the safety bar. A : Front B : Rear Remove all mud and dirt from around the breather. After removing the mud or dirt from around the breather, remove the breather, immerse it in cleaning fluid and clean it. When cleaning the breather, clean the breathers at two places (front and rear). After removing the breather, take steps to prevent dirt or dust from entering the mount. CLEANING AIR CONDITIONER CONDENSER Do not wash the condenser with a steam cleaner. There is danger that the condenser could overheat.

Always wear protective glasses, dust mask, and other protective equipment. If there is mud or dust on the air conditioner condenser, clean it with water. If the water pressure is too high, the fins may get damaged. When washing with a high pressure washing machine, apply the water from a reasonable distance. WASHING METHOD 1. Open top cover (1) at the front of the engine hood. 2. Remove 2 mounting bolts (3) at the top of condenser (2). 3. Hold the top of condenser (2) and tip it to the rear. A gap is formed between the engine hood and condenser. 4. Wash with water from the top. 5. Pull condenser (2) back to the original position and fit bolt (3). 3-22 WA320PT-5L