Komatsu — GRADING OR LEVELING A SURFACE

OPTIONAL ATTACHMENTS GRADING OR LEVELING A SURFACE Always operate the machine in reverse when carrying out leveling operations. Although not advised, if it is necessary to carry out leveling operations when traveling forward, do not angle the bucket down more than 20 degrees. Turn the E.C.S.S. switch (if equipped) OFF when carrying out leveling operations. 1. With a full bucket of material. Move the machine backward slowly while spreading soil from the bucket little by little. 2. With the machine in the FLOAT position go over the spread soil in reverse with the bucket on the ground and tipped down slightly to level the ground by back-dragging. 3.

Load some more soil into the bucket, put the lift arm control lever in FLOAT position, level the bucket at ground level, and smooth the ground by moving backward. WA320PT-5L 5-7