OPERATION MACHINE ELECTRONIC MONITORING DISPLAY This display system electronically monitors several major functions, these functions include the amount of operating hours on the machine, all operating alert and failure information and service intervals. These functions can be accessed by using the mode selector switches (1) and (2). It is important for the operator of this machine to know how to access this information and understand what this information contains. MONITOR MODE SELECTOR SWITCHES In order to access information on the monitor, the mode selector switches must be used in conjunction with each other.
These switches are located on the right hand side of the instrument panel as shown in the illustration. They allow you to enter or exit a mode as well as navigate within the mode. There operating function is listed below: MODE SELECTOR SWITCH 1 Mode selector switch (1) is used to switch the function of the character display on the monitor screen. The basic operation is as follows. Position: To select, confirm or enter a mode or operation. Position: To exit or cancel mode or operation. 2-16 WA320PT-5L 1. Hour Meter And Odometer Display 2. Action Code Display 3. Failure Code Display 4. Service Display 5. Selecting Language 6. Setting HST Function