Komatsu — PROGRAMING TELEPHONE NUMBER

OPERATION MODE SELECTOR SWITCH 2 Mode selector switch (2) is used to navigate within the chosen display on the monitor screen. The basic operation is as follows. Position: To go on to the next screen or function, move the cursor forward, or to increase the number when entering numerals Position:

To go back to the previous screen or function, or to move the cursor back, or to reduce the number when entering numerals MONITOR DISPLAY INFORMATION Once you know the operating functions of the mode selector switches (1) and (2) it is important to be able to access this information and navigate within the mode you have selected, below is a list of these mode and how to access and navigate within them. HOUR METER AND ODOMETER DISPLAY An hour meter reading or an odometer reading can be displayed in this mode if desired. Hour Meter Display During normal operation display (1) shows the total time in hours that the machine has been operating.

While the engine is running, the hour meter advances even if the machine is not moving. The hour meter advances by 1 hour of operation, regardless of the engine speed. You can also access the hours on the machine with the ignition switch in the OFF position simply by pressing the. button. Odometer Display To check the total distance that the machine has traveled or to simply use the odometer feature while traveling: With the ignition switch in the ON position or the machine running. Press the button and the display will change from the hour meter display to the odometer display.

The display will remain in the odometer mode until the ignition switch is turned to the “OFF” position or the is pressed. ADJUSTING MONITOR BRIGHTNESS To adjust monitor display. See “ADJUSTING MONITOR BRIGHTNESS” on page (5-24) PROGRAMING TELEPHONE NUMBER To program in phone numbers. See “PROGRAMING TELEPHONE NUMBERS” on page (5-23) WA320PT-5L 2-17