Komatsu — ACTION CODE DISPLAY

OPERATION ACTION CODE DISPLAY If an inspection or maintenance procedure must be performed, if there is a failure on the machine, or if it should become necessary to change your operating methods, An action code E00 , E01 , E02 , or E03 will be displayed on the monitor display portion (3). If different failures should occur at the same time, the action code for the most serious problem is displayed. The action code will be displayed first, then the system with the failure will be displayed at 3 second intervals. The level of seriousness in the action code order is as follows, starting with the most serious: E03, E02, E01, E00.

In the case of action codes E00, E02, and E03, the alarm buzzer sounds intermittently and the central warning lamp lights up. Action Code (E03) This code is the most serious of all the codes, it usually indicates an oil pressure loss or a malfunction in a safety related system. If this code should appear on the monitor, stop and shut the machine down immediately. Contact your Komatsu Dealer and do not operate the machine until the problem is repaired. Action Code (E02) This code warns the operator of a potential failure if action is not taken immediately. This would be an over heat condition or an engine over speed.

If this code should appear while operating the machine, stop the machine and allow the system to cool down or slow the machine down to a safe controllable speed. Action Code (E01) This code alerts the operator of a problem in the system. This would be low coolant level or a maintenance due item. If this code should appear while operating the machine, take the machine to a maintenance area so servicing can be carried out or the problem can be checked. Action Code (E00) This code will appear if the machine is traveling at an excessive road speed or down hill at an excessive speed. In either case the machines engine is running in an over speed condition.

If this should occur, slow the machine down immediately to a safe speed. Never over speed the engine, damage to the engine will occur. Remark Action codes cannot be erased or canceled, after repairs have been made the system will automatically reset its self and the code will disappear. 2-18 WA320PT-5L