OPERATION MODE SELECTOR SWITCH 2 Switch (12) is used to switch the function of the character display. See page 2-22 for details on this switch. ATTACHMENT SELECT SWITCH This switch (18) switches the bucket positioner and fork positioner. Position (a): When using the bucket, set to this position. Position (b): When using the fork, set to this position. DUMP SPEED SWITCH Use this switch (19) to select the bucket dump speed. Position (a): High speed Position (b): Low speed The bucket tilt speed is not affected by this switch. QUICK COUPLER SWITCH Use this switch (20) to connect and release the connection of the coupler and attachment when installing or removing the attachment. Position (a):
Release Push the switch in to this position, then pull lock (A) in the direction of the arrow (c) and release the connection. Position (b): Connect FRONT WIPER SWITCH Switch (A) of switch (13) turns the front wiper on. If button (B) is pressed, washer fluid will be sprayed onto the front glass while the button is being pressed. Position (a): (OFF) Stop Position (b): (INT) Intermittent wiper Position (c): Low-speed wiper Position (d): High-speed wiper WA320PT-5L 2-27