OPERATION HAZARD LAMP SWITCH Switch (8) is used in emergencies, when the machine breaks down or has to be parked on the road. Position (a): Direction indicator lamp and directional indicator pilot lamp flash, and pilot lamp (A) lights up at the same time. Position (b): Lamps go out Remark Use the hazard lamp only in emergencies. Using the hazard lamp when traveling may cause confusion for other machine operators. FRONT WORK LAMPS SWITCH Switch (9) is used to light up the front working lamp. Position (a): Working lamp and pilot lamp (A) light up Position (b):
Working lamp goes out Remark If the lamp switch is not in the ON position for the side clearance lamp or head lamp, the working lamp will not light up. Always turn the working lamp off before traveling on public roads. REAR WORK LAMPS SWITCH Switch (10) is used to light up the rear working lamp. Position (a): Working lamp and pilot lamp (A) light up Position (b): Working lamp goes out Remark If the lamp switch is not in the ON position for the side clearance lamp or head lamp, the working lamp will not light up. Always turn the working lamp off before traveling on public roads. MODE SELECTOR SWITCH 1 Switch (11) is used to switch the function of the character display.
See page 2-21 for details on this switch. 2-26 WA320PT-5L