OPERATION HEAD LAMPS-TURN SIGNALS-DIMMER SWITCH Head Lamps Switch Switch (6) is used to light up the front head lamps, side clearance lamps, tail lamps, and instrument panel. Position (a): OFF (Lamps go out) Position (b): Side clearance lamps, tail lamps, and instrument panel light up Position (c): Head lamps light up in addition to lamps at (position Turn Signals Switch Switch (6) is used to operate the turn signal lamp. (a) position: LEFT TURN (Push lever forward.) (b) position: OFF (c) position: RIGHT TURN (Pull lever back.) When the steering wheel is turned back, the lever automatically returns to its original position. If it does not return, return it manually.
Dimmer Switch Switch (6) is used to switch the head lamps between high beam and low beam. Position (a): LOW BEAM Position (b): HIGH BEAM HORN BUTTON When the horn button (7) in the center of the steering wheel is pressed, the horn will sound. WA320PT-5L 2-25