OPERATION CLIMATE CONTROL OPERATION When defrosting, if the temperature control switch is set so that all lamps are red, this will improve the performance for defrosting and demising. Set the vent mode selector switch to the intermediate position to give the desired condition. With the FACE vents, it is possible to adjust the direction of the air flow and to turn it on or off. However, do not set to the FACE mode with the vents closed. WHEN NOT USING THE AIR CONDITIONER Run the air conditioner in cooling or dehumidification + heating for several minutes from time to time to prevent the loss of the oil film on various parts of the compressor system.
Remark If the temperature inside the cab is low, the air conditioner may not work. In such cases, use the recirculated air to heat up the inside of the cab, then turn the air conditioner switch on to run the air conditioner. WA320PT-5L 2-43 Condition of use Fan Switch A/C Switch Temp. Control Air Select Switch Mode Select Switch Cooling Rapid HI ON Blue RECIRC FACE Normal HI - LO ON Half blue FRESH FACE Dehumidifying, heating HI - LO ON Blue/red FRESH FOOT Heating Rapid HI OFF Red RECIRC FOOT Normal HI - LO OFF Half red FRESH FOOT Defroster HI ON Red/blue FRESH DEF Vent HI - LO OFF Blue FRESH FACE