Password inquiry menu will be displayed. NOTE: The initial password is "1111." SET PASSWORD The password can be changed within ten minutes while the starter switch is in "I" (ON) position. After changing password, be sure to use the changed password. ENTER PASSWORD CAUTION Failure to enter correct password three times, will return normal display screen, and another attempt will not be possible for ten minutes. Figure 88 FG000228 A three item menu will be displayed. The items are "LOCK," "UNLOCK," and "CHANGE PASSWORD." An item can be selected by using the "UP" ( ) or "DOWN" ( ) buttons, and then selected by pressing the "SELECT" ( ) button.
Press "ESC" ( ) button (3, Figure 68) for 1 more second, it returns to main menu. According to the selection of adoption (lock) or nonadoption (unlock), the password function will be in working or nonworking. SET PASSWORD When you want to change a password, follow below procedure. Lock 1. Move the cursor to "Change Password." Unlock Change Password 2. Input desired 4 digits password using selector buttons (at the first column). Input the same password one more time (at the second column) 3. Select adoption (lock) or nonadoption (unlock) at set password menu. : UP : DOWN : SELECT FG000229 NOTE: Keep in mind never to forget password. Figure 89 NOTE:
Please contact a DOOSAN distributor, if you forget your password. OP001760 Operating Controls 2-40