OPERATING SECTION 4 Page 17 4.6. STARTING THE ENGINE Fig. 4.14. Starting the Engine 1. Brake and Decelerator Pedal and Brake Lock Knob 2. Electrical System Master Switch 3. Transmission Shift Lever 4. Transmission Neutral Lock Lever 5. Engine Speed and Shut Down Lever 6. Horn 7. Start Switch Button 8. Engine Oil Pressure gauge 9. Engine Coolant Gauge and Light NOTE: Before operating the machine perform each of the 10 hour maintenance requirements shown in Section 5.2. SCHEDULED MAINTENANCE. This engine cannot be started by towing, pushing or coasting the machine. WARNING!
Before entering the operator s compartment, walk completely around the machine and clear the area of personnel and obstructions. WARNING! Read all product graphics before starting, operating, maintaining, or repairing the machine. WARNING! Before starting the engine or when the machine is standing with the engine running, lock the transmission shift lever in neutral, apply brake lock and lower all raised equipment: WARNING! Understand all control functions before starting the engine. WARNING! Never start the engine indoors unless proper exhaust ventilation is provided to remove deadly exhaust gases. Once the engine is running, move the machine outdoors as soon as possible.
Exhaust gases are hazardous and can cause unconsciousness and death. DRESSTA TD-20H