SECTION 4 OPERATING Page 24 4.13. DOWNGRADE OPERATION WARNING! When operating a machine downhill, always put the transmission in the low range position. Use the brake pedal to slow the machine. Never go downhill with the transmission control in neutral. Failure to do so could result in losing control of the machine and rollover could result. Before going downgrade, select the range, which will provide full tractor control without overspeeding the engine. 4.14. OPERATING OVER AN OBSTRUCTION When crossing a log or ditch bank, use the decelerator pedal to slow the machine; and when possible, cross at an angle.
Then gradually increase the power to the tracks as the machine moves forward, over, and down. If the load is light, it may also be necessary to use the brake pedal to avoid abrupt movements. 4.15. STOPPING THE MACHINE Fig. 4.21. Stopping the Machine 1. Engine Speed and Shut Down Lever 2. Brake and Decelerator Pedal 3. Transmission Neutral Lock Lever 4. Transmission Shift Lever 5. Brake Lock Lever TD-20H DRESSTA