. OPERATION EXPLANATION OF COMPONENTS the fan the the 3 - 50 The time for operating the emerge ncy steering continuously is a maximum of 60 seconds When using the emergency steeri ng, travel at a speed of less t han 5 km/h (3.1 MPH ). For details, see "EMERGENCY S TEERING (PAGE 3-137)" in the OPERATION section. COOLING FAN REVERSE ROTATI ON SWITCH the cooling fan in the rever or. on switch ON This switch (23) is used to rotate direction when cleaning the radiat Position (a): Manual reverse rotati When the fan is rotati switch is pressed onc if the switch is presse normal direction. W reverse direction, the lamp on the machine the procedure wh RADIATOR FINS 4-27)".
ng in the normal direction, if t e, the fan will rotate in revers d again, the fan will rotate in t hen the fan is rotating in t cooling fan reverse rotation pi monitor lights up. For details en cleaning, see "CLEA AND COOLER FINS (PAG rating the switch. Run the engine at idling when ope REMARK When the direction of rotation of the fan switches, the revers e rotation pilot lamp f lashes. COOLING FAN AUTO REVERSE R OTATION SWITCH the cooling fan in the rever or. function ON (If e quipped) switch (23) is used to rotate This direction when cleaning the radiat Position (a): Auto reverse rotation The fan automatically every 2 hours. The pilot lamp inside reverse rotation pilot light up.
rotates in reverse for 2 minut the switch and the cooling f lamp on the machine moni on switch ON Position (b): Manual reverse rotati When the fan is rotati switch is pressed onc if the switch is presse normal direction. W reverse direction, the lamp on the machin rotation continues fo switch is pressed. Fo cleaning, see "CLE COOLER FINS (PAG ng in the normal direction, if t e, the fan will rotate in revers d again, the fan will rotate in t hen the fan is rotating in t cooling fan reverse rotation pi e monitor lights up. Rever r approx. 10 minutes after t r details of the procedure wh AN RADIATOR FINS AN E 4-27)". Position (c):
Neutral (OFF) The cooling fan is co nstantly set to normal rotation Run the engine at idling when ope