Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS Conditions for switching fan rotation When using manual reverse rotation function 3 - 51 REMARK itched, the reverse rotation pilot lamp flashes. When the fan rotation direction is sw itched, the reverse rotation pilot lamp flashes To protect the machine, the fan rota tion direction may not change when the fan is operati ng under high lo ad or in low temperatures. (For details, s ee Conditions for switching fan rotation.) rotation direction returns to the normal direction. When the engine is stopped, the fan If the switch is set to position (b) (ma nual reverse rotation ON), the switch will return to positi on (c) (Neutral) when the switch is released.

Even if position (b) of the switch is n ot kept pressed, the fan will rotate in the reverse dire ction for a fixed time, so there is no need to keep the swit ch pressed at position (b). During reverse rotation of the fan, if the engine cooling water, hydraulic oil, or torque conv erter oil o verhe at (the caution lamp for the oil temperature gauge on the machine monitor lights up), the reverse rotation of the fan is forcibly stopped and the fan switche s to rotation in the normal direction. of the automatic reverse rotation functions: (Standard: 2 hours) rse rotation (Standard:

2 minutes) r to carry out the adjustment It is possible to adjust the following Cycle fan automatic reverse rotation Continuous time fan automatic reve Please ask your Komatsu distributo Switching from normal rotation to reverse r otation to reverse rotation only if all the following conditions are fulfilled. fan reverse rotation pilot lamp on the machine monitor will change from fan direction will not change. ling fan reverse rotation pilot lamp on the machine monitor will continue to atic reverse rotation switch is pressed once. d 1200 rpm.

The fan will switch from normal rotation to reverse rotation only if all the following conditions are fulfille If the direction is switched, the cooling hange flashing and will stay lighted up. If all the conditions are not fulfilled, the If Portion (b) of the cooling fan autom The engine speed is between Lo an The engine water temperature is les s than 90°C (194°F). (The indicator on the engine wate r temperature gauge is below horizontal) The hydraulic oil temperature is less than 90°C (194°F). (The indicator on the hydraulic o il temperature gauge is below horizontal) The torque converter oil temperat ure is below 100°C (212°F).

(The indicator on the torque converter oil tal) ter the engine was started. temperature gauge is below horizon At least 30 seconds have passed af Switching from reverse rotation to normal r otation n to normal rotation if any of the following conditions are fulfilled. The fan will switch from reverse rotatio n to normal rotation if any of the following conditions a re fulfille If the direction is switched, the cooling f an reverse rotation pilot lamp on the machine monitor w ill chang e as fo llows: Lighted up -> flashing -> OFF. e fan direction will not change.

If none of the conditions are fulfilled, th If the direction is not switched, the cool ing fan reverse rotation pilot lamp on the machine mo nitor will c hange from being lighted up to flashing and will con tinue to flash.