Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS 3 - 52 Conditions More than 10 minutes have pass ed after the fan started to rotate in r everse an d the engin e speed has d ropped t o less than 1200 rpm. When portion (b) of the cooling f an automatic reverse rotation switc h is presse d again wh en the f an is r otating i n reverse, and the engine spee d has dropped to less than 1200 rpm . Whe n using automatic reverse rotation Switching from normal rotation to rever se rotation tion to reverse rotation only if all the following conditions are fulfilled. ling fan reverse rotation pilot lamp on the machine monitor will change from the fan direction will not change.

The fan will switch from normal rota tion to reverse rotation only if all the following conditions If th e direction is switched, the coo flashing and will stay lighted up. If al l the conditions are not fulfilled, If th e direction is not switched, the c ooling fan reverse rotation pilot lam p on the m achine mo nitor will chang e from OF F to flashing and will continue to flash. se rotation switch is at position (a). Conditions The cooling fan automatic rever The engine water temperature is less than 90°C (194°F). (The indicator on the engine wat er temperature gauge i s below horizontal) The hydraulic oil temperature is less than 90°C (194°F).

(The indicator on the hydraulic o il temperature gauge i s below horizontal) The torque converter oil tempe rature is below 100°C (212°F). (The indicator on the torque converter oil zontal) d after the engine was started. assed. t emperature gauge is below hori At least 30 seconds have passe The set time for switching has p torque conve Switching from reverse rotatio n to normal rotation ation to normal rotation if both of the following conditions are fulfilled. The fan will switch from reverse rot ation to normal rotation if both of the following conditions If th e direction is switched, the cooli ng fan reverse rotation pilot lamp on t he machin e monitor w ill change as f ollows:

Lighted up -> flashing -> OFF. ed, the fan direction will not change. If n either of the conditions are fulfill ed, the fan direction will not change. If th e direction is not switched, the c ooling fan reverse rotation pilot lam p on the m achine mo nitor will chang e from bei ng lighted up to flashing and will continue to flash. Conditions When the cooling fan automatic reverse rotation switch is set to any position ot her than po rtion (a) when the fan i s rotating in reverse, and the h ydraulic oil temperature has gone above 50°C (122°F) (the indicator on the is in the green range).

hydraulic oil temperature gauge When the continuous time for fa n automatic reverse rotation has passed and t he hydrauli c oil temperatu re has gone above 50°C (122°F) (the in dicator on the hydraulic oil temperature gaug e is in the g reen range). TORQUE CONVERTER LOCK-UP S WITCH (If e quipped) For details of the torque converter lo ck-up, see "HANDLING TORQUE C ONVERT ER LOCK-U P (PAGE 6-3) " in the ATTACHMENTS, OPTIONS sectio n.