Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING 3 - 168 When towi ng a machin e downhill, it may be necessary to connect another machine to the rear of the machine being towe d in order to provide ample rimpull and braking power. This makes it possibl e to prevent the machine from losing control. out under various differing conditions, so it is impossible to determine beforehand the Towing ma y be carried requireme nts for towing . Towing on flat horiz ontal roads will require the minimum rimpul l, while towing on slopes o r on unev en road surf aces will require the m aximum rim pull.

Connect a diagram at WHEN ENGINE CAN BE USED If the transmission and steering wheel can be operated, and the engine is running, it is possible to tow the distance to the edge of the road. If the trans mission and machine o ut of mud or to move it for a short The opera tor should sit on the machine bein g towed and operate the steering in the di rection that the machine is towed. WHEN ENGINE CANNOT BE USED d, use the following procedure. When towing a machine w ith the engine stoppe 1. 2. 3. 4. 1. The trans mission oil d oes not lubricate the sy stem, so remove t he front and rear drive sh afts. If necessary, block the tires t o prevent the machine from movin g. e the steering cylinder. 2.

The steer ing cannot b e operated, so remov Even if th e brakes are in good condition, th e brakes can only be used a limited numb er of times. There is no change i n the operating force for the brake pedal, but the braking force is reduced each time the pedal is d. depresse 3. Connect t he towing eq uipment securely. Wh en carrying out towing operations, use two machines of at least the same cla ss as the mac hine being towed. Co nnect one machine each to the front and r ear of the machine being towed, th en remove th e blocks from the tire 4. Parking b The parki ng brake can nont be turned OFF. To release the parking brake, do as follo