Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING TROUBLESHOOTING WHEN MACHINE RUNS OUT OF FUEL WARNING METHOD OF TOWING MACHINE WARNING 3 - 167 When starti ng the engine again, check caref ully that the area around the engine is safe before cranking th When star ting the engine after running o ut of fuel, fill with fuel and bleed the air from the fuel sys tem before starting. For details of bleeding the air, see "PR OCEDURE FOR BLEEDING AI R (PA GE 4-51)". Serious inju ry or death could result if there i of wire rope or method of towing a disabled Always b e sure to check carefully that the for towin g is ample for the weight of the t Never us e a wire rope which has cut stran or kinks (C).

There is danger that the rope operatio n. Always w ear leather gloves when handlin Never to w a machine on a slope. During t he towing operation, never stand and the machine being towed. Move the machine slowly and be sure not the wire rope. If there i s a failure in the brake line, the b extremel y careful when towing. NOTICE the machine for a short distances, such as to a place for inspection or maintenance. hine must not be towed for long distances.

Only tow the machine for a short distance s, such as to a place for inspectio The mac hine must not be towed for long For detai ls of the permissible towing load for this machine, see Section "SP ECIFICATIONS (PAGE 5-2)" For detai ls of the procedure for towing a machine when it has broken down, please contact your Koma This mach ine must not be towed except in emergencies. When towing t he machine, take the fol lowing precautions. Before r eleasing the brakes, put bloc ks under the wheels to prevent t he machine from movin g. If the wheels are not bloc ked, the machine may sudde nly move.

When t owing a machine, tow it at a lo w speed of less than 2 km/h (1 .2 MPH ), and for a dista nce of a few meters to a pla ce where repairs can be carrie d out. The machine should be towed only in emergenc ies. If the machine must be moved long distances, use a transporter. If it is im possible to operate the steer ing and brakes of the machine being t owed, do not let anyone ride on the machin e. Keep th e angle of the towrope as sma ll as possible. Keep the angle b etwee n the centerlines of the two machines to within 30 degrees. The tow ing machine should normally be of the same class as the m achine being towed.

Ch eck that the towing machin e and towed machine both ha ve ample braking power and th at the t owing machine h as ample rimpu ll to control both machines on the slopes or on the tow road.