. MAINTENANCE SERVICE PROCEDURE EVERY 1000 HOURS SERVICE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING Prepare a filter wrench NOTICE Do not fill the filter cartridge with fuel. Cap (A) is installed to prevent dirt from entering the inside of the filter cartridge. A 9 J A 0 7 6 3 9 4 - 52 Maintenanc e for every 50, 100, 250 and 500 hours service should be carried out at the After the en gine has been operated, all part s are at high temperature, so do not replace the filter i mmediately. Wait for a ll parts to cool dow n before starting the operation. ne fuel piping system when the engine is running.
High press ure is generated inside the engi ne fuel piping system when t When repla replacing t cing the filter, wait for at least 30 seconds after stopping th e engine to let the inter nal pressure go down before he filter. g any fire or flame close. Do not brin NOTICE Genuine K omatsu fuel filter cartridges use a special filter that has high ly efficient filtering abili ty. When replacing th e filter cartridge, a lways use a genuine Komatsu p art. The comm on rail fuel injection system use d on this machine consists o f more precise parts tha n the conventional in jection pump and If any part system. Al nozzle.
other than a genuine Komatsu fil ter cartridge is used, dust or dirt may get in and caus e problems with the in jection ways avoid using substitute par ts. When carry ing out inspection or maintenan ce of the fuel system, pay m ore attention than norma l to the entry of dirt. I f dirt is stuck to an y part, use fuel to wash it off co mpletely. 1. Open th e engine side cover on the ri 2. Set the c ontainer to catch the fuel un 3. Using a filter wrench, turn filter cartri on remo 4. Clean th 5. Coat the packing surface of the filter 6. Remove filter cartridge cap (A) and in