REFERENCE ONLY ~ w o on Z =? S11,OMST,G1 ·1g.19MAR91 140497 PN=97 Storage 4. Drain fuel tank and add 30 ml (1 oz) of inhibitor to the fuel tank for each 15L (4 U.S. gal) of tank capacity. 5. Add 30 ml (1 oz) of inhibitor to the engine crankcase for each 0.95 L (1 qt) of crankcase oil. 6. Disconnect air intake piping from the manifold. Pour 90 ml (3 oz) of inhibitor into intake system and reconnect the piping. 7. Crank the engine several revolutions with starter (do not allow the engine to start). 9. Remove and clean batteries. Store them in a cool, dry place and keep them fully charged. 11. Seal all openings on engine with plastic bags and tape supplied in storage kit.
Follow instructions supplied in kit. 14. Store the engine in a dry protected place. If engine must be stored outside, cover it with a waterproof canvas or other suitable protective material and use a strong waterproof tape. 89 8. Loosen fan and alternator belts to relieve tension. Remove belts if desired. 12. Coat all exposed metal surfaces with grease or corrosion inhibitor. 13. Clean the exterior of the engine and touchup any scratched or chipped painted surfaces. 10. Disengage the PTO clutch.