John Deere Series 300 (3029,4039,4045,6059,6068) — John Deere Series 300 (3029,4039,4045,6059,6068) User Manual

REFERENCE ONLY 140497 PN=9B Sll,QMST,J ·19·09AUG94 Storage 5. Perform all appropriate prestarting checks. (See PRESTARTING CHECKS in Engine Operating Guidelines Section.) 6. Crank engine for 20 seconds with starter (do not allow the engine to start). Then start engine. IMPORTANT: DO NOT operate starter more than 30 seconds at a time. Wait at least 2 minutes for starter to cool before trying again. 7. Operate engine at slow idle for several minutes. Warm up carefully and check all gauges before placing engine under load. 90 1. Remove all protective coverings from engine. Unseal all openings in engine and remove covering from electrical systems. 2. Remove the batteries from storage.

Install batteries and connect the cables. 3. Install new fan and alternator belts. Adjust belt tensions to their appropriate specifications. (See FAN AND ALTERNATOR BELTS TENSION OR REPLACEMENT in Lubrication and Maintenance/250 Hour Section.) REMOVING ENGINE FROM STORAGE 4. Fill fuel tank.