REFERENCE ONLY S11,OMLM, CW ·19·09JUN94 Lubrication and Maintenance/250 Hour 45 NOTE: Change engine oil and filter for the first time after 100 hours maximum of operation, then every 250 hours thereafter. If John Deere TORQ-GARD SUPREME PLUS-50 engine oil and a John Deere oil filter are used, the oil and filter change interval may be extended by 50 hours. OILSCAN is a John Deere sampling program to help you monitor machine performance and identify potential problems before they cause serious damage. OILSCAN kits are available from your John Deere dealer. Oil samples should be taken prior to the oil change. Refer to instructions provided with kit. 1.
Run engine approximately 5 minutes to warm up oil. Shut engine off. NOTE: Drain plug location may vary, depending on the application. 3. Remove plug (arrow) and drain oil from engine crankcase. CHANGE ENGINE OIL AND FILTER 2. Drain oil while warm.