John Deere Series 300 (3029,4039,4045,6059,6068) — John Deere Series 300 (3029,4039,4045,6059,6068) User Manual

REFERENCE ONLY COl 1ll w LL COl Z ::;> COl ~ o u RG18293.7 -19-17FEB93 Sll,OMSE,AOl -19-17FEB93 140497 PN=74 Rectangular Fuel Filter Round Fuel Filter Service/As Required 66 BLEED THE FUEL SYSTEM A CAUTION: Escaping fluid. under pressure can penetrate the skin causing serious injury. Relieve pressure before disconnecting fuel or other lines. Tighten all connections before applying pressure. Keep hands and body away from pinholes and nozzles which eject fluids under high pressure. Use a piece of cardboard or paper to search for leaks. Do not use your hand.

If ANY fluid is injected into the skin, it must be surgically removed within a few hours by a doctor familiar with this type injury or gangrene may result. Doctors unfamiliar with this type of injury may call the Deere & Company Medical Department in Moline, Illinois, or other knowledgeable medical source. Whenever the fuel system has been opened up for service (lines disconnected or filters removed), it will be necessary to bleed air from the system. 2. When equipped, operate supply pump primer lever (A) or switch on the ignition (electric supply pumps) so that supply pump is operating. 3. Wait until fuel flow is free from air bubbles.

Tighten bleed plug or screw securely, continue operating hand primer until pumping action is not felt. Push hand primer inward (toward engine) as far as it will go. 1. Loosen the air bleed plug or air bleed screw (A) on fuel filter base.