REFERENCE ONLY ~ u w 2l '" Z =? '40497 PN=78 S11,OMlM, FE . 19·02MAA93 S11 ,OMlM,FF ·1~09AUG94 Service/As Required NOTE: Some engines may have a dust unloader valve (C) on the air cleaner. If equipped, squeeze valve tip to release any trapped dirt particles. ( 70 1. Remove wing nut and remove canister cover shown in small illustration inset. 2. Remove wing nut (A) and remove primary element (8) from canister. IMPORTANT: Remove secondary element (8) ONLY if it is to be replaced. DO NOT attempt to clean secondary element. 4. To replace secondary element, remove nut (A) and remove element. Immediately install a new element so dirt does not enter air intake system.
(See REPLACE AIR CLEANER ELEMENTS in Lubrication and Maintenance/600 Hours/1-Year Section.) REMOVE AND INSPECT AIR CLEANER ELEMENTS 3. Thoroughly clean all dirt from inside canister.