REFERENCE ONLY 14049 7 PN=79 13 w o '" Z ~ S11.0MLM.AF -19·22JUN94 Service/As Required IMPORTANT: Always repl",ce secondary (safety) filter elements. DO NOT attempt to clean them. Do not blow air from outside portion of filter with air nozzle. Wear safety glasses and remove bystanders. 1. Gently pat sides of element with palm of hand (A) to loosen dirt. DO NOT tap element against a hard surface. A CAUTION: Only a special air cleaning gun (8) should be ~sed. Concentrated air pressure from an ordinary air nozzle may severely damage filter element. Do not exceed 210 kPa (2.1 bar) (30 psi) when cleaning filter element. 71 2.
Insert the cleaning gun into element, hold air nozzle about 25.4 mm (1.0 in.) from perforated metal retainer. Force air through filter from inside to outside and move air gun up and down pleats to remove as much dirt as possible. 4. Inspect element for damage after cleaning. Replace element if any damage is found. CLEANING PRIMARY FILTER ELEMENT 3. Repeat steps 1 and 2 to remove additional dirt.