hitachi — Brake Warning Set Pressure (Increase)

OPERATIONAL PERFORMANCE TEST / Component Test Conditions for Measurement: 1. Select the following switch positions. Forward/Reverse Lever Parking Brake Switch N ON Measurement: 1. Stop the engine. Turn the key switch to ON position. 2. Set the engine control dial to slow idle. 3. Depress the brake pedal several times and make the warning buzzer sound. 4. Start the engine. Measure the pressure when sounding of the warning buzzer stops. Notice that it is difficult to read the gauge as the pressure increases rapidly. 5. Repeat the measurement three times and calculate the average values. Evaluation: Refer to the Performance Standard Table in Group T4-2. Remedy:

Refer to Troubleshooting B in Group T5-6. T4-5-31