hitachi — Transmission Learning

OPERATIONAL PERFORMANCE TEST / Adjustment Error display when calibration is aborted during calibration When calibration is aborted during calibration, the error display as illustrated in the right is selected. After the trouble is solved, start calibration again. T4GB-04-06-013 Error No. NOTE: Cause of the error No. display on failure of learning (from first gear to reverse): The clutch at the speed when the error occurs may be out of correctable range (malfunction of drive unit parts) or the transmission oil temperature may be beyond the specification. T4-6-5 Error No. Error 000108 The key is turned into OFF. 000208 Engine speed is out of specification.

000308 The parking brake is turned into OFF. 000408 The machine starts traveling. 000508 The forward/reverse lever is operated. 000109 000209 000309 Failure of learning at first gear. 000110 000210 000310 Failure of learning at second gear. 000111 000211 000311 Failure of learning at third gear. 000112 000212 000312 Failure of learning at fourth gear. 000113 000213 000313 Failure of learning at forward. 000114 000214 000314 Failure of learning at reverse.