hitachi — Diagnosing Procedure

TROUBLESHOOTING / Diagnosing Procedure 4. Operate the machine yourself Try to identify the trouble by operating the machine yourself. If the trouble cannot be confirmed (this states are repeated that the trouble is resolved later altough the trouble sometimes occurs), stop the engine and obtain further details of the malfunction from the operator. Also, check for any incomplete connections of the wire harnesses correponding to the trouble. NOTE: It should take time to required to find the malfunction according to the trouble during the troubleshooting.

The malfunction may occur due to up and down of hydraulic temperature, weather and under the special condition including expansion by heat and shorted harness by moisture. The informations of weather when the mulfunction occurs, time from the engine start to the trouble occurrence are also important. T5-1-3