TROUBLESHOOTING/ Troubleshooting A External Device System T5-5-28 Fault Code Trouble Cause 10002-2 Abnormal EGR valve control Difference between the target valve lift and actual position is beyond 20%. 1347-0 Open circuit in suction control valve drive system, Shorted circuit in + B or GND The suction control valve drive current is beyond 2400 mA or below 50 mA. Or, difference between the tartget current and actual current is 1000 mA or more. 651-3 Open circuit in injection nozzle #1 drive system No monitor input signal of injector 1. 652-3 Open circuit in injection nozzle #2 drive system No monitor input signal of injector 2.
653-3 Open circuit in injection nozzle #3 drive system No monitor input signal of injector 3. 654-3 Open circuit in injection nozzle #4 drive system No monitor input signal of injector 4. 655-3 Open circuit in injection nozzle #5 drive system No monitor input signal of injector 5. 656-3 Open circuit in injection nozzle #6 drive system No monitor input signal of injector 6. 987-3 Abnormal check engine lamp No monitor signal of the check engine lamp 1485-2 Abnormal main relay system Voltage in the main relay system is 1 V or less with the main relay coil output ON. Although the main relay coil output is turned OFF, the main relay is kept ON.