hitachi — ECM Fault Code List

TROUBLESHOOTING/ Troubleshooting A T5-5-39 Presumptive Symptoms in Real Machine Operation Assumptive Conditions at Backup Fault Code (Tech 2) Vibration of the engine may be large, Rough idle, output power decrease may occur, faulty increasing of rotation speed may occur, the engine may be stalled. The injector cannot be controlled. → Stop output of drive signal at broken common side (Protect the engine from damage) P0611 P0612 Output power decrease, dark smoke occurs. All analogue sensor cannot be used. P1630 Output power decrease CPU is broken. P0606 The engine cannot start. P0606 Output power decrease Sub CPU is broken. P0606 The engine stops. Data of ROM cannot be read.

P1601 There is no influence when operating the machine. Data cannot be written to EEPROM. P1603 Same as Abnormal accelerator sensor ← P1631 Same as Abnomal atmospheric and in-take temperature sensors ← P1632 Same as Abnomal coolant temperature, fuel temperature and hydraulic oil pressure sensors ← P1633 Same as Abnomal boost pressure and boost temperature sensors ← P1634 Same as Abnomal rail pressure and EGR position sensors ← P1635 Vibration of the engine may be large, Rough idle, output power decrease may occur, faulty increasing of rotation speed may occur, the engine may be stalled. The injector cannot be controlled.

→ Stop output of drive signal at broken common side (Protect the engine from damage) P1261 P1262