TROUBLESHOOTING / Troubleshooting B T5-6-4 Parts Function Symptoms in control system when trouble oc- curs. Symptoms in machine operation when trouble occurs. Forward/Reverse Switch • Sends the command signal on forward/reverse to MC. • When the machine travels forward, the signal on forward is sent to the neutral relay in forward/reverse switch. • MC makes forward/reverse switch control disabled during the work. • The machine cannot travel forward/reverse by using the forward/reverse switch during the work. • Although the forward/reverse selector switch is turned ON and the forward/reverse switch indicator on monitor lights during the work, the machine does not travel forward/reverse.
Forward/Reverse Selec- tor Switch • Sends the command signal that the forward/reverse switch is enabled during the work to MC. • The machine cannot travel forward/reverse by using the forward/reverse switch. • The machine cannot travel forward/reverse by using the forward/reverse switch during the work. • Although the forward/reverse selector switch is turned ON, the forward/reverse switch indicator on monitor does not light during the work. Fan Reversing Switch • Sends the command signal that the fan motor rotates reverse to MC. • The hydraulic drive fan cleaning control cannot be selected or released. • Although the switch is turned ON, the cooling fan does not rotate reverse.
• Although the switch is turned OFF, the cooling fan does not rotate forward. • If the switch is turned OFF and the forward/reverse switch is operated, engine speed does not increase. Ride Control Switch • Sends the command signal on ride control to MC. • Ride control cannot be stopped or operated. • Altough the ride control switch is turned ON, ride control is not operated. (Travel speed: 7 km/h) • Although the ride control switch is turned OFF, ride control is not stopped. Emergency Steering Check Switch • Sends the operating command signal on emergency steering pump unit to the monitor unit. • The command signal is not sent to the monitor unit.
• The command signal continues to be sent to the monitor unit. • Emergency steering check operation cannot be operated. • Whenever the engine strats, the emergency steering pump unit is operated for 30 seconds. Lift Arm Auto Leveler Set Switch (Optional) • Sends the operating command signal on lift arm auto level to MC. • Sends the setting signal on lift arm stop position to MC. • The lift arm auto level cannot be operated or stopped. • The lift arm stop position cannot be set randomly. • Although the switch is turned ON, the lift arm does not stop at the set position. • Although the switch is turned OFF, the lift arm stops at the set position.