TROUBLESHOOTING / Troubleshooting B Disconnect con- nector ICF-C in ICF. Check if voltage between terminal #C7 of harness end of connector and vehicle frame is specification. YES Open circuit in fuse or harness between key switch and monitor unit. Disconnect connector MC-B in MC. Check if voltage between terminal #B16 of harness end of connector and vehicle frame is specifi- cation. Open circuit in fuse or harness between key switch and MC. YES Open circuit in fuse or harness between key switch and ICF. YES · Key switch: ON · Specification: 24 V Check if voltage between terminal #24 of harness end of connector in ECM and vehi- cle frame is specification.
Check for conti- nuity between terminal #2 of harness end of connector in main relay and vehicle frame. YES · Key switch: ON · Specification: 24 V NO YES Open circuit in fuse or harness between key switch and ECM. · Key switch: ON · Specification: 24 V NO Faulty ground in main relay. NO Open circuit in harness between main relay and ECM. NO Connector MC-B Connector ICF-C #B16 B1 B8 B25 B19 T1V1-05-04-002 #C7 T5-6-35 NO